New knob caps for Prophet-5/10/600, Pro-One etc

Painted vs new
Ugly old painted Prophet-5 cap (left). My brand new cap (right)

I bought a Prophet-5 where the black caps were painted black… it looked absolutely awful. Searching the web for replacement knobs (like I’m sure many of you Prophet owners have) only turned up extremely expensive old stuff, which usually was “out of stock” anyway. I did get hold of some original replacement knobs, but these were pretty scratchy and worn too.

I decided to fix this! I had a company re-manufacture the aluminum cap to the exact original dimensions. (I also looked into making the plastic knob part, but then I realized most people already have these and they usually look ok).

The old caps are easy to replace, they basically pop off with the help of a knife blade. There is a little dot of glue in there that doesn’t provide much resistance 🙂

Now, only the more high end SCI gear (Prophet-5, Prophet-10 etc) had the fancy knobs with aluminum caps. The more low end stuff (Pro-One, Prophet-600, Split-Eight etc) only had the plastic part of the knob, with a simple painted white indicator line. The best part is that now you can pimp these models too! Many vintage (80s) Sequential Circuits gear used the same plastic knobs, with this cap being the only difference. The T8 and some other machines used different wider and shorter knobs, and unfortunately my caps will not fit those.

The pic below shows two old Prophet-5 knobs, one with a silver cap, the other with a removed black cap. Next to those a Pro-One knob. And in the bottom right corner: old knobs given a second life with my new caps!

HOW TO ORDER

Contact me throgh the Techsmechs Vintage Synth web site

Stay updated by liking my Facebook page: Techsmechs Vintage Synth on Facebook

IMG_5065

A Pro-One, Prophet-600 and Prophet-5 all recapped: